Fortinet MR1 manual Default Setting

This command adds a protocol-based VLAN group to the system. The <group-name>is a character string of 1 to 16 characters. When it is created, the protocol group will be assigned a unique number that will be used to identify the group in subsequent commands.

Syntax

switchport protocol group <group-name> no switchport protocol group <group-name>

<group-name> - a VLAN Group Name (a character string of 1 to 16 characters).

no - This command removes the protocol-based VLAN group that is identified by this <group-name>.

Default Setting

None

Command Mode

Global Config

This command adds all physical interfaces to the protocol-based VLAN identified by

<group-name>. A group may have more than one interface associated with it. Each interface and protocol combination can only be associated with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this command will fail, and the interface(s) will not be added to the group.

Syntax

switchport protocol group all <group-name> no switchport protocol group all <group-name>

<group-name> - a VLAN Group Name (a character string of 1 to 16 characters). all - All interfaces.

no - This command removes all interfaces from this protocol-based VLAN group that is identified by this <group-name>.

83