Base Unit Settings

1Press {j/OK}.

2Select Base Unit Setup, then press {>}.

3Enter 0000(default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select Call Options, then press {>}.

5Select Call Bar, then press {>}.

6 Select Onor Off, then press {>}. 7 Press {ih}.

Other options

Changing the base unit PIN (Personal Identification Number)

For security, the base unit PIN must be entered when changing certain settings. The default PIN is 0000.

Important:

LIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

1Press {j/OK}.

2Select Base Unit Setup, then press {>}.

3Enter 0000(default base unit PIN). LIf you changed the PIN, enter it.

4Select Other Options, then press {>}.

5Select Base Unit PIN, then press {>}.

6Enter the new 4-digit base unit PIN, then press {j/OK}.

7Press {ih}.

Resetting the base unit to its default settings

1Press {j/OK}.

2Select Base Unit Setup, then press {>}.

3Enter 0000(default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select Other Options, then press {>}.

5Select Reset Base, then press {>}.

6Select Yes, then press {>}.

7 Press {ih}.

Note:

LThe following items will be deleted or reset to their default settings:

Settings listed on page 30, 43

Base unit ringtone

Base unit ringer volume (Medium)

Caller list

LThe following items will be retained:

Date and time

Shared phonebook entries

Repeater mode

Recordings, including your greeting message, caller messages, voice memos, audible call announcements, and recorded conversations

34

Page 34
Image 34
Panasonic KX-TG1840NZ operating instructions Resetting the base unit to its default settings