Base Unit Settings
Call options
Changing the recall time
Change the recall time, if necessary, depending on the requirements of your service provider or PBX.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
34).
4Select “Call Options”, then press {>}.
5Select “Recall”, then press {>}.
6Select the desired setting, then press {>}.
7Press {ih}.
Setting pause length
Change the pause length, if necessary, depending on the requirements of your service provider or PBX.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
34).
4Select “Call Options”, then press {>}.
5Select “Pause Length”, then press {>}.
6Select the desired setting, then press {>}.
7Press {ih}.
Storing/changing emergency numbers
These settings determine which phone numbers can be dialled while the call bar feature is on (page 28).
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
34).
4Select “Call Options”, then press {>}.
5Select “Emergency No.”, then press {>}.
6Select a memory location, then press {>}.
LIf the memory location already contains an emergency number, the number is displayed.
7Enter/edit the number, then press {j/OK}.
LTo erase an emergency number, press and hold {C/T}.
8Press {ih}.
Note:
LThe default setting for emergency numbers are stored in the first 3 memory locations. It is recommended that you do not overwrite these numbers.
Selecting area codes to be deleted automatically
In some situations, phone numbers stored automatically in the Caller ID list (page 36) will include area codes. If you do not want to dial the area codes when making calls from the Caller ID list, you can store the area codes which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the Caller ID
32
