Useful Information
Problem | Cause & solution |
Noise is heard during a call. | LYou are using the handset or base unit in an area |
| with high electrical interference. Locate the handset |
| and base unit away from interference sources, such |
| as antenna and mobile phones. |
|
|
The handset/base unit stops | LDisconnect the AC adaptor and turn off the |
working while being used. | handset. Connect the AC adaptor, turn on the |
| handset and try again. |
|
|
While storing an entry in the | LA call is being received. To answer the call, press |
phonebook or assigning a one | {C}. Programming will be cancelled. Start again. |
touch dial, the handset starts to |
|
ring. |
|
|
|
Pressing {R} does not | LThe redialled number was more than 24 digits long. |
display/dial the last number dialled. | Redial the number manually. |
|
|
The handset beeps intermittently | LFully charge the batteries (page 10). |
and/or 7 flashes. |
|
|
|
I fully charged the batteries, but | LClean the charge contact and charge again (page |
7 still flashes. | 10). |
| LIt is time to replace the batteries (page 11). |
|
|
Caller information is not displayed. | LYou must subscribe to Caller ID service. |
| LYour unit is connected to a telephone line with |
| ADSL (JetStream) service. We recommend that |
| you contact your ADSL service provider to have an |
| ADSL Splitter installed. We do not recommend the |
| use of generic ADSL filters. |
|
|
While viewing caller information, | LDo not pause for over 1 minute while searching. |
the display returns to standby |
|
mode. |
|
|
|
I cannot set call restriction. | LCall restriction can be set using handset 1 only. If |
| you have multiple handsets, you can confirm which |
| handset is handset 1 by pressing {x} and {1} on |
| the base unit. Handset 1 will start ringing. |
|
|
I cannot register a handset to a | LThe maximum number of base units (4) are already |
base unit. | registered to the handset. Cancel unused base unit |
| registrations from the handset (page 48). |
| LThe maximum number of handsets (6) are already |
| registered to the base unit. Cancel unused handset |
| registrations from the base unit (page 47). |
| LYou entered the wrong PIN number. If you forget |
| your PIN, consult your nearest Panasonic service |
| centre. |
| LLocate the handset and the base unit away from |
| other electrical appliances. |
|
|
56
