Preparation
of the adaptor may cause it to become disconnected.
LThe unit will not work during a power failure. We therefore recommend you also connect a standard telephone to the same telephone line using a
LThe unit’s answering system will not answer incoming calls on your FaxAbility number.
Battery installation
1Insert the batteries negative (T) terminal first.
2Close the handset cover.
Note:
LUse only rechargeable batteries (page 5).
Battery charge
Place the handset on the base unit for about 7 hours before initial use.
When charging, the battery icon is shown as follows.
When the batteries are fully charged, 5 remains on the display.
Note:
LIt is normal for the handset to feel warm during charging.
LIt takes 7 hours to fully charge the batteries, however, you can use the handset before the batteries are fully charged.
LClean the charge contacts (page 7) of the handset and base unit with a soft, dry cloth once a month, otherwise the batteries may not charge properly. Clean more often if the unit is exposed to grease, dust or high humidity.
Battery strength
Battery icon | Battery strength |
5High
6Medium
10
