Useful Information
57
Answering system
Problem Cause & solution
The other party complains that they
cannot leave a message.
LThe recording time is set to “Greeting Only”.
Select “1 Minute” or “3 Minutes” (page 44).
LMessage memory is full. Erase unnecessary
messages (page 40).
I cannot operate the answering
system.
LAnother handset or the base unit user is using the
answering system, accessing the caller list or
changing base unit settings. Wait for the other user
to finish.
LA caller is leaving a message. Wait for the caller to
finish.
LThe handset is too far from the base unit. Move
closer.
I cannot operate the answering
system remotely.
LYou are entering the wrong remote access code.
Confirm that the correct remote code is entered. If
you forget the remote access code, store a new
remote access code again (page 42).
LYou are pressing the dial keys too quickly. Press
each key firmly.
LThe answering system is turned off. Turn it on (page
43).
LYou are using a pulse telephone. Try again using a
touch tone phone.
While recording a greeting
message or listening to messages,
the unit rings and recording stops.
LA call is being received. Answer the call and try
again later.