Syntax

show ip rip interface brief

Default Setting

None

Command Mode

Privileged Exec

Display Message

Interfacet: Valid slot and port number separated by a forward slash.

IP Address: The IP source address used by the specified RIP interface.

Send Version: The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-1, RIP-1c, RIP-2.

Receive Version: The RIP version(s) allowed when receiving updates from the specified interface. The types are none, RIP-1, RIP-2, Both

RIP Mode: RIP administrative mode of router RIP operation; enable, disable it.

Link State: The mode of the interface (up or down).

6.6.2Configuration Commands

6.6.2.1enable rip

This command resets the default administrative mode of RIP in the router (active).

Syntax

enable no enable

no - This command sets the administrative mode of RIP in the router to inactive.

Default Setting

Enable

Command Mode

Router RIP Config

359

Page 359
Image 359
Fortinet MR1 manual Enable rip, Syntax Show ip rip interface brief Default Setting