Fortinet MR1 manual Ip pimsm cbsrhashmasklength, Ip pimsm crppreference

7.5.2.9ip pimsm cbsrhashmasklength

This command is used to configure the CBSR hash mask length to be advertised in bootstrap messages for a particular PIM-SM interface. This hash mask length will be used in the hash algorithm for selecting the RP for a particular group. The valid range is 0 - 32. The default value is 30.

Syntax

ip pimsm cbsrhashmasklength <0 - 32> no ip pimsm cbsrhashmasklength

<0 - 32> - The CBSR hash mask length.

no - This command is used to reset the CBSR hash mask length for a particular PIM-SM interface to the default value.

Default Setting

30

Command Mode

Interface Config

7.5.2.10ip pimsm crppreference

This command is used to configure the Candidate Rendezvous Point (CRP) for a particular PIM-SM interface. The valid values are from (-1 to 255), and the value of -1 is used to indicate that the local interface is not a Candidate RP interface.

The active router interface, with the highest IP Address and crppreference greater than -1, is chosen as the CRP for the router. The default value is 0.

In the CRP advertisements sent to the bootstrap router (BSR), the router interface advertises itself as the CRP for the group range 224.0.0.0 mask 240.0.0.0.

Syntax

ip pimsm crppreference <-1 - 255> no ip pimsm crppreference

420