Fortinet MR1 manual Switchport protocol group, Syntax Switchport priority all

This command configures the port priority assigned for untagged packets for all ports presently plugged into the device. Any subsequent per port configuration will override this configuration setting.

Syntax

switchport priority all <0-7>

<0-7> - The range for the priority is 0-7. all – All interfaces

Default Setting

0

Command Mode

Global Config

5.2.3.16switchport protocol group

This command adds the physical <slot/port> interface to the protocol-based VLAN identified by <group-name>. A group may have more than one interface associated with it. Each interface and protocol combination can only be associated with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this command will fail, and the interface(s) will not be added to the group.

Syntax

switchport protocol group <group-name> no switchport protocol group <group-name>

<group-name> - a VLAN Group Name (a character string of 1 to 16 characters).

no - This command removes the interface from this protocol-based VLAN group that is identified by this <group-name>.

Default Setting

None

Command Mode

Interface Config

82