Fortinet MR1 manual Set igmp groupmembership-interval, Set igmp maxresponse

Default Setting

None

Command Mode

Vlan Database

set igmp groupmembership-interval

This command sets the IGMP Group Membership Interval on a particular VLAN. The Group Membership Interval time is the amount of time in seconds that a switch will wait for a report from a particular group on a particular interface, which is participating in the VLAN, before deleting the interface from the entry. This value must be greater than IGMP Maximum Response time value. The range is 2 to 3600 seconds.

Syntax

set igmp groupmembership-interval <1-3965> <2-3600> no set igmp groupmembershipinterval <1-3965>

<1-3965> - VLAN ID (Range: 1 – 3965).

<2-3600> - The range of group membership interval time is 2 to 3600 seconds.

no - This command sets the IGMP Group Membership Interval time on a particular VLAN to the default value.

Default Setting

260

Command Mode

Vlan Database

set igmp maxresponse

This command sets the IGMP Maximum Response time on a particular VLAN. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface, which is participating in the VLAN, because it did not receive a report for a particular group in that interface. This value must be less than the IGMP Query Interval time value.

104