![](/images/new-backgrounds/1299835/299835795x1.webp)
This command displays all the static routes configured in the static mcast table if is specified or displays the static route associated with the particular <sourceipaddr>.
Syntax
show ip mcast mroute static [<sourceipaddr>]
<sourceipaddr > - the IP Address of the multicast data source.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Source IP: This field displays the IP address of the multicast packet source.
Source Mask: This field displays the mask applied to the IP address of the multicast packet source.
RPF Address: This field displays the IP address to be used as RPF for the given source and mask.
Metric: This field displays the metric value corresponding to the source address.
Interface: Valid slot and port number separated by a forward slash.
7.3.1.5show mrinfo
This command is used to display the neighbor information of a
Syntax show mrinfo
Default Setting
None
398