Fortinet MR1 manual Area virtual-link authentication, Area virtual-link dead-interval

Disabled

Command Mode

Router OSPF Config

6.3.2.15area virtual-link authentication

This command configures the authentication type and key for the OSPF virtual interface identified by <areaid> and <neighborid>.

Syntax

area <areaid> virtual-link <neighborid> authentication [{none {simple <key>} {encrypt <key> <0-255>}}]

no area <areaid> virtual-link <neighborid> authentication

<areaid> - Area ID.

<neighbor> - Router ID of the neighbor. none - No authentication.

<key> - The [key] is composed of standard displayable, non-control keystrokes from a standard 101/102-key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 256 bytes. Unauthenticated interfaces do not need an authentication key.

<0-255> - Specifies the Key ID. The range is 0 to 255.

<no> - This command configures the default authentication type for the OSPF virtual interface identified by <areaid> and <neighborid>.

Default Setting

The default authentication type is none.

Command Mode

Router OSPF Config

6.3.2.16area virtual-link dead-interval

This command configures the dead interval for the OSPF virtual interface on the virtual interface identified by <areaid> and <neighborid>.

333