server-timeout:Sets the value, in seconds, of the timer used by the authenticator state machine on this port to timeout the authentication server. The supp-timeout must be a value in the range 1 - 65535.

Syntax

dot1x timeout {quiet-period reauth-period server-timeout supp-timeout tx-period} <seconds>

no dot1x timeout {quiet-period reauth-period server-timeout supp-timeout tx-period}

<seconds> - Value in the range 0 – 65535.

no - This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set.

Default Setting

reauth-period: 3600 seconds

quiet-period: 60 seconds

tx-period: 30 seconds

supp-timeout: 30 seconds

server-timeout: 30 seconds

Command Mode

Interface Config

5.8.4Radius Configuration Commands

5.8.4.1radius accounting mode

This command is used to enable the RADIUS accounting function.

Syntax

radius accounting mode no radius accounting mode

214

Page 214
Image 214
Fortinet MR1 manual Radius Configuration Commands, Radius accounting mode