Fortinet MR1 manual Syntax Show queue trust slot/port

Command Mode

Privileged EXEC, User EXEC

Display Message

The following information is repeated for each user priority. IP Precedence The IP Precedence value.

Traffic Class The traffic class internal queue identifier to which the IP Precedence value is mapped.

5.14.1.3show queue trust

This command displays the current trust mode setting for a specific interface. The slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the port trust mode of the interface is displayed. If omitted, the port trust mode of each interface in the system is shown. If the platform does not support independent per-port class of service mappings, the output represents the system-wide port trust mode used for all interfaces.

Syntax

show queue trust [<slot/port>]

<slot/port > The interface number.

Default Setting

None

Command Mode

Privileged EXEC, User EXEC

Display Message

Class of Service Trust Mode The trust mode of this interface.

Non-IP Traffic ClassThe traffic class used for non-IP traffic. This is only displayed when the COS trust mode is set to either 'trust ip-dscp' or 'trust ip-precedence'.

Untrusted Traffic Class The traffic class used for all untrusted traffic. This is only displayed when the COS trust mode is set to 'untrusted'.

290