Fortinet MR1 manual Ip ospf authentication, Ip ospf cost

Default Setting

None

Command Mode

Interface Config

6.3.2.27ip ospf authentication

This command sets the OSPF Authentication Type and Key for the specified interface. The value of <type> is either none, simple or encrypt. If the type is encrypt a <keyid> in the range of 0 and 255 must be specified.

Syntax

ip ospf authentication {none {simple <key>} {encrypt <key> <keyid>}} no ip ospf authentication

<key > - It is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 256 bytes.

<keyid> - The range is 0 to 255.

Default Setting

The default authentication type is none. The default password key is not configured. Unauthenticated interfaces do not need an authentication. The default keyid is not configured.

Command Mode

Interface Config

6.3.2.28ip ospf cost

This command configures the cost on an OSPF interface.

340