7 IP Multicast Commands
7.1Distance Vector Multicast Routing Protocol (DVMRP) Commands
This section provides a detailed explanation of the DVMRP commands. The commands are divided into the following different groups:
Show commands are used to display device settings, statistics and other information. Configuration commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.
7.1.1Show Commands
7.1.1.1show ip dvmrp
This command displays the
Syntax
show ip dvmrp
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Admin Mode This field indicates whether DVMRP is enabled or disabled. This is a configured
value.
Display Message
Admin Mode Enable or disable DVMRP function.
Version This field indicates the version of DVMRP being used.
Total Number of Routes This field indicates the number of routes in the DVMRP routing table.
Reachable Routes This field indicates the number of entries in the routing table with
Slot/Port Valid slot and port number separated by a forward slash.
Interface Mode This field indicates the mode of this interface. Possible values are Enabled and Disabled.
State This field indicates the current state of DVMRP on this interface. Possible values are Operational or
380
