Fortinet MR1 Telnet Session Commands, Show line vty, Syntax Telnet host port debug line echo

<0-65535> - silent time (Range: 0 - 65535) in seconds. no - This command sets the maximum value to the default.

Default Setting

0

Command Mode

Line Config

5.3.3Telnet Session Commands

5.3.3.1telnet

This command establishes a new outbound telnet connection to a remote host.

Syntax

telnet <host> [port] [debug] [line] [echo]

<host> - A hostname or a valid IP address.

[port] - A valid decimal integer in the range of 0 to 65535, where the default value is 23. [debug] - Display current enabled telnet options.

[line] - Set the outbound telnet operational mode as ‘linemode’, where by default, the operational mode is ‘character mode’.

[echo] - Enable local echo.

Default Setting

None

Command Mode

Privileged Exec

5.3.3.2show line vty

This command displays telnet settings.

135