
no - This command sets the SSH connection session timeout value, in minutes, to the default. Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.
Default Setting
5
Command Mode
Global Config
5.3.8DHCP Client Commands
5.3.8.1ip dhcp restart
This command is used to initiate a BOOTP or DCHP client request.
Syntax
ip dhcp restart
Default Setting
None
Command Mode
Global Config
5.3.8.2ip dhcp client-identifier
This command is used to specify the DCHP client identifier for this switch. Use the no form to restore to default value.
Syntax
ip dhcp client-identifier {text <text> hex <hex>}
161