![](/images/new-backgrounds/1299835/299835383x1.webp)
no username <username>
<username> - is a new user name (Range: up to 8 characters).
no - This command removes a user name created before. Note: The admin user account cannot be deleted.
nopassword - This command sets the password of an existing operator to blank. When a password is changed, a prompt will ask for the operator's former password. If none, press enter.
Default Setting
No password
Command Mode
Global Config
5.7.2.2username snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login user. The valid authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password will be used as the snmpv3 authentication password. The <username> is the login user name for which the specified authentication protocol will be used.
Syntax
username snmpv3 authentication <username> {none md5 sha} no username snmpv3 authentication <username>
<username> - is the login user name. md5 - md5 authentication method. sha - sha authentication method. none - no use authentication method.
no - This command sets the authentication protocol to be used for the specified login user to none. The <username> is the login user name for which the specified authentication protocol will be used.
Default Setting
No authentication
Command Mode
192