Fortinet MR1 manual Syntax Show ip pimsm Default Setting

Syntax

ip pimdm query-interval <10 - 3600> no ip pimdm query-interval

<10 - 3600> - This is time interval in seconds.

no - This command resets the transmission frequency of hello messages between PIM enabled neighbors to the default value.

Default Setting

30

Command Mode

Interface Config

7.5Protocol Independent Multicast – Sparse Mode (PIM-SM) Commands

7.5.1Show Commands

7.5.1.1show ip pimsm

This command displays the system-wide information for PIM-SM.

Syntax

show ip pimsm

Default Setting

None

Command Mode

Privileged Exec

Display Message

Admin Mode: This field indicates whether PIM-SM is enabled or disabled. This is a configured value.

Join/Prune Interval (secs): This field shows the interval at which periodic PIM-SM Join/Prune messages are to be sent. This is a configured value.

410