3Com 3CRWX120695A, 3CRWX440095A manual Sends an Snmp trap message to any network management system

		set snmp trap 151
	„ set ip snmp server on page 142
	„ set snmp trap on page 151
	„ set snmp trap receiver on page 153
set snmp trap	Enables or disables the SNMP trap capability. Traps are event
	notifications. When a trap condition occurs, the wireless LAN switch
	sends an SNMP trap message to any network management system
	specified as a trap receiver.
	Syntax — set snmp trap {enable disable} [all trap-name]
	„ enable — Enables trap information to be sent.
	„ disable — Disables the sending of trap information.
	„ all — Enables or disables all traps.
	„ trap-name— Any of the items in Table 35.
	Table 35 SNMP Trap Names
	Name	Description
	AuthenTraps	Generated when the WX switch’s SNMP
		agent receives a bad community string.
	AutoTuneRadioChannelChangeTraps	Generated when the AutoTune feature
		changes the channel on a radio.
	AutoTuneRadioPowerChangeTraps	Generated when the AutoTune feature
		changes the power setting on a radio.
	ClientAssociationFailureTraps	Generated when a client’s attempt to
		associate with a radio fails.
	ClientAuthorizationSuccessTraps	Generated when a client is successfully
		authorized.
	ClientAuthenticationFailureTraps	Generated when authentication fails for a
		client.
	ClientAuthorizationFailureTraps	Generated when authorization fails for a
		client.
	ClientClearedTraps	Generated when a client’s session is cleared.
	ClientDeAssociationTraps	Generated when a client is deassociated
		from a radio.
	ClientDot1xFailureTraps	Generated when a client experiences an
		802.1X failure.