3Com 3CRWX120695A, 3CRWX440095A manual Set ap dap radio radio-profile, „ set radio-profile mode on

set {ap dap} radio radio-profile 277

„set radio-profile mode on page 291

set {ap dap} radio radio-profile

Assigns a radio profile to an MAP radio and enables or disables the radio.

Syntax — set {ap port-listdap dap-num}radio {1 2} radio-profile name mode {enable disable}

„ap port-list— List of ports.

„dap dap-num— Number of a Distributed MAP.

„radio 1 — Radio 1 of the MAP.

„radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models.)

„radio-profilename — Radio profile name of up to 16 alphanumeric characters, with no spaces.

„mode enable — Enables radios on the specified ports with the parameter settings in the specified radio profile.

„mode disable — Disables radios on the specified ports.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — When you create a new profile, the radio parameters in the profile are set to their factory default values.

To enable or disable all radios that use a specific radio profile, use set radio-profile.

Examples — The following command enables radio 1 on ports 3 through 6 assigned to radio profile rp1:

WX1200# set ap 3-6 radio 1 radio-profile rp1 mode enable success: change accepted.

See Also

„clear {ap dap} radio on page 234

„display radio-profileon page 257

„set {ap dap} radio mode on page 276