3Com 3CRWX120695A, 3CRWX440095A manual Syntax set radio-profile name rts-threshold threshold

set radio-profile rts-threshold 295

You must disable all radios that use a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples — The following command configures 802.11b/g radios that use the radio profile rp_long to advertise support for long preambles instead of short preambles:

WX4400# set radio-profile rp_long preamble-length long success: change accepted.

See Also

„display radio-profileon page 257

„set radio-profile mode on page 291

set radio-profileChanges the RTS threshold for the MAP radios in a radio profile. The RTS

rts-thresholdthreshold specifies the maximum length a frame can be before the radio uses the RTS/CTS method to send the frame. The RTS/CTS method clears the air of other traffic to avoid corruption of the frame due to a collision with another frame.

Syntax — set radio-profile name rts-threshold threshold

„name — Radio profile name.

„threshold — Maximum frame length, in bytes. You can enter a value from 256 through 3000.

Defaults — The default RTS threshold for an MAP radio is 2346 bytes.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples — The following command changes the RTS threshold for radio profile rp1 to 1500 bytes:

WX4400# set radio-profile rp1 rts-threshold 1500 success: change accepted.