3Com 3CRWX120695A, 3CRWX440095A manual Uplinkfast, 32,768, Pink to, Primary link fails

set spantree uplinkfast 345

„ all — Changes the bridge priority on all VLANs.

„ vlan vlan-id— VLAN name or number. MSS changes the bridge priority on only the specified VLAN.

	Defaults — The default root bridge priority for the switch on all VLANs is
	32,768.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — The following command sets the bridge priority of VLAN
	pink to 69:
	WX4400# set spantree priority 69 vlan pink
	success: change accepted.
	See Also
	„ display spantree on page 324
set spantree	Enables or disables STP uplink fast convergence on a wireless LAN switch.
uplinkfast	This feature enables a WX switch with redundant links to the network
	backbone to immediately switch to the backup link to the root bridge if
	the primary link fails.

Syntax — set spantree uplinkfast {enable disable}

„enable — Enables uplink fast convergence.

„disable — Disables uplink fast convergence.

Defaults — Disabled.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — The uplink fast convergence feature is applicable to bridges that are acting as access switches to the network core (distribution layer) but are not in the core themselves. Do not enable the feature on WX switches that are in the network core.