3Com 3CRWX120695A, 3CRWX440095A manual RF Detection Commands

17 RF DETECTION COMMANDS

MSS automatically performs RF detection scans on enabled and disabled radios to detect rogue access points. A rogue access point is a BSSID (MAC address associated with an SSID) that does not belong to a 3Com switch and is not a member of the ignore list configured on the seed switch of the Mobility Domain. The ignore list is a list of third-party (friendly) BSSIDs that are not rogues.

MSS can issue countermeasures against rogue devices to prevent clients from being able to use them.

You can configure RF detection parameters only on the seed switch of a

Mobility Domain.

Commands by	This chapter presents RF detection commands alphabetically. Use
Usage	Table 85 to locate the commands in this chapter based on their use.
	Table 85 RF Detection Commands by Usage
	Type	Command
	Rogue Information	display rfdetect mobility-domainon page 461
		set rfdetect log on page 468
		display rfdetect data on page 459
		display rfdetect visible on page 463
	Countermeasures	set rf detect countermeasures on page 465
		display rfdetect ignore on page 461
		set rfdetect countermeasures mac on page 466