3Com 3CRWX120695A Clear interface, Removes an IP interface, Syntax clear interface vlan-idip

clear interface 109

Table 25 IP Services Commands by Usage (continued)

Type	Command
	set snmp trap on page 151
	set snmp trap receiver on page 153
	clear snmp trap receiver on page 114
Ping	ping on page 132
Telnet Client	telnet on page 158
Traceroute	traceroute on page 160

clear interface Removes an IP interface.

Syntax — clear interface vlan-idip

„vlan-id— VLAN name or number

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — If the interface you want to remove is configured as the system IP address, removing the address can interfere with system tasks that use the system IP address, including the following:

„Mobility domain operations

„Topology reporting for dual-homed MAP access points

„Default source IP address used in unsolicited communications such as AAA accounting reports and SNMP traps

Examples — The following command removes the IP interface configured on VLAN mauve:

WX1200# clear interface mauve ip success: cleared ip on vlan mauve

See Also

„set interface on page 135

„set interface status on page 136

„display interface on page 118