3Com 3CRWX440095A, 3CRWX120695A manual Set vlan port

104CHAPTER 5: VLAN COMMANDS

	3Com recommends that you do not use the name default. This name is
	already used for VLAN 1. 3Com also recommends that you do not
	rename the default VLAN.
	You cannot use a number as the first character in a VLAN name. 3Com
	recommends that you do not use the same name with different
	capitalizations for VLANs. For example, do not configure two separate
	VLANs with the names red and RED.
	VLAN names are case-sensitive for RADIUS authorization when a client
	roams to a wireless LAN switch. If the WX switch is not configured with
	the VLAN the client is on, but is configured with a VLAN that has the
	same spelling but different capitalization, authorization for the client fails.
	For example, if the client is on VLAN red but the WX switch to which the
	client roams has VLAN RED instead, RADIUS authorization fails.
	Examples — The following command assigns the name marigold to
	VLAN 3:
	WX4400# set vlan 3 name marigold
	success: change accepted.
	See Also
	„ set vlan port on page 104
set vlan port	Assigns one or more network ports to a VLAN. You also can add a virtual
	port to each network port by adding a tag value to the network port.
	Syntax — set vlan vlan-id port port-list [tag tag-value]
	„ vlan-id— VLAN name or number.
	„ port port-list— List of physical ports.
	„ tag tag-value— Tag value that identifies a virtual port. You can
	specify a value from 1 through 4095.
	By default, no ports are members of any VLANs. A wireless LAN switch
	cannot forward traffic on the network until you configure VLANs and add
	network ports to the VLANs.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.