3Com 3CRWX120695A, 3CRWX440095A manual Syntax set authentication web ssid ssid-namewired

set authentication web 201

See Also

„clear authentication mac on page 169

„display aaa on page 180

„set authentication admin on page 189

„set authentication console on page 191

„set authentication dot1x on page 193

„set authentication last-resorton page 197

„set authentication web on page 201

set authentication Configures an authentication rule to allow a user to log in to the network

webusing a web page served by the WX switch. The rule can be activated if the user is not otherwise granted or denied access by 802.1X, or granted access by MAC authentication.

Syntax — set authentication web {ssid ssid-namewired}

user-glob method1 [method2] [method3] [method4]

„user-glob— A single user or a set of users.

Specify a username, use the double-asterisk wildcard character (**) to specify all usernames, or use the single-asterisk wildcard character (*) to specify a set of usernames up to or following the first delimiter character—either an at sign (@) or a period (.). (For details, see “User Globs” on page 24.)

„ssid ssid-name— SSID name to which this authentication rule applies. To apply the rule to all SSIDs, type any.

„wired — Applies this authentication rule specifically to users connected to a wired authentication port.

„method1, method2, method3, method4 — At least one and up to four methods that MSS uses to handle authentication. Specify one or more of the following methods in priority order. MSS applies multiple methods in the order you enter them.

A method can be one of the following:

„local — Uses the local database of usernames and user groups on the WX switch for authentication.