set system name 55

„set system contact on page 51

„set system name on page 55

set system name Changes the name of the WX switch from the default system name and also provides content for the CLI prompt, if you do not specify a prompt.

Syntax set system name string

„string — Alphanumeric string up to 256 characters long, with no blank spaces. Use a unique name for each WX switch.

Defaults — By default, the system name and command prompt have the same value. The factory default for both is the model number (WX1200 for the 3Com Wireless LAN Switch WX1200, WX4400 for the 3Com Wireless LAN Controller WX4400).

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — Entering set system name with no string resets the system name to the factory default.

To view the system name string, type the display system command.

Examples — The following example sets the system name to a name that identifies the WX switch:

WX4400# set system name WX-bldg3 success: change accepted. WX-bldg3#

See Also

„clear system on page 39

„display system on page 42

„set prompt on page 50

„set system contact on page 51

„set system location on page 54

Page 55
Image 55
3Com 3CRWX120695A, 3CRWX440095A manual „ set system contact on „ set system name on, Syntax set system name string