3Com 3CRWX440095A, 3CRWX120695A manual Syntax set service-profile name auth-psk enable disable

302CHAPTER 9: MANAGED ACCESS POINT COMMANDS

History —Introduced in MSS Version 3.0.

Usage — The last-resortfallthru authentication type allows any user to access any SSID managed by the service profile. This method does not require the user to provide a username or password. Use the last-resortmethod only if none of the SSIDs managed by the service profile require secure access.

The web-authauthentication type requires additional configuration items. (See the “Configuring AAA for Network Users” chapter of the Wireless LAN Switch and Controller Configuration Guide.)

Examples — The following command sets the fallthru authentication for

SSIDS managed by the service profile rnd_lab to none:

WX4400# set service-profile rnd_lab auth-fallthru none success: change accepted.

See Also

„display service-profileon page 261

„set web-aaaon page 221

„set service-profileweb-aaa-formon page 314

set service-profileEnables preshared key (PSK) authentication of Wi-Fi Protected Access

auth-psk(WPA) clients by MAP radios in a radio profile, when the WPA information element (IE) is enabled in the service profile.

Syntax — set service-profile name auth-psk {enable disable}

„name — Service profile name.

„enable — Enables PSK authentication of WPA clients.

„disable — Disables PSK authentication of WPA clients.

Defaults — When the WPA IE is enabled, PSK authentication of WPA clients is enabled by default. If the WPA IE is disabled, the auth-psksetting has no effect.

Access — Enabled.

History —Introduced in MSS Version 3.0.