3Com 3CRWX120695A manual Defaults None, Syntax set server group group-namemembers server-name1

set server group 417

Examples — To set a RADIUS server named RS42 with IP address 198.162.1.1 to use the default accounting and authorization ports with a timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead time, and a key string of keys4u, type the following command:

WX1200# set radius server RS42 address 198.162.1.1 timeout 30 retransmit 2 deadtime 5 key keys4U

See Also

„display aaa on page 180

„set authentication admin on page 189

„set authentication console on page 191

„set authentication dot1x on page 193

„set authentication last-resorton page 197

„set authentication mac on page 199

„set authentication web on page 201

„set radius on page 413

„set server group on page 417

set server group Configures a group of one to four RADIUS servers.

Syntax — set server group group-namemembers server-name1

[server-name2][server-name3][server-name4]

„group-name— Server group name of up to 32 characters, with no spaces or tabs.

„members server-name1, server-name2, server-name3, server-name4 — The names of one or more configured RADIUS servers. You can enter up to four server names.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must assign all group members simultaneously, as shown in the example. To enable load balancing, use set server group load-balance enable.