3Com 3CRWX440095A, 3CRWX120695A manual Set port type, Wired-auth

86CHAPTER 4: PORT COMMANDS

The following command sets ports 1 through 3 and port 5 for MAP access point model AP7250 and enables PoE on the ports:

WX1200# set port type ap 1-3,5 model ap7250 poe enable

This may affect the power applied on the configured ports.

Would you like to continue? (y/n) [n]y

The following command sets ports 1 through 3 and port 5 for MAP access point model AP8250 and enables PoE on the ports:

WX1200# set port type ap 1-3,5 model ap8250 poe enable

This may affect the power applied on the configured ports.

Would you like to continue? (y/n) [n]y

The following command sets ports 1 through 3 and port 5 for MAP access point model AP8750 and enables PoE on the ports:

WX1200# set port type ap 1-3,5 model ap8750 poe enable

This may affect the power applied on the configured ports.

Would you like to continue? (y/n) [n]y

	The following command resets port 5 by clearing it:
	WX1200# clear port type 5
	This may disrupt currently authenticated users.
	Are you sure? (y/n) [n]y
	success: change accepted.
	See Also
	„ clear dap on page 58
	„ clear port type on page 61
	„ set {ap dap} radio antennatype on page 269
	„ set dap on page 73
	„ set port type wired-authon page 86
	„ set radio-profile11g-onlyon page 280
	„ set system countrycode on page 51
set port type	Configures a WX switch port for a wired authentication user.
wired-auth	Before changing the port type from ap to wired-author from
	wired-authto ap, you must reset the port with the clear port type

command.