6IP SERVICES COMMANDS
Use IP services commands to configure and manage IP interfaces,
management services, the Domain Name Service (DNS), Network Time
Protocol (NTP), and aliases, and to ping a host or trace a route.
Commands by
Usage
This chapter presents IP services commands alphabetically. Use Table25
to locate commands in this chapter based on their use.
Table25 IP Services Commands by Usage
Type Command
IP Interface set interface on page 135
set interface status on page 136
display interface on page 118
clear interface on page 109
System IP Address set system ip-address on page 155
clear system ip-address on page 115
IP Route set ip route on page140
display ip route on page123
clear ip route on page111
SSH Management set ip ssh server on page145
set ip ssh on page143
set ip ssh idle-timeout on page145
set ip ssh absolute-timeout on page144
Telnet Management set ip telnet on page 146
set ip telnet server on page 147
display ip telnet on page125
clear ip telnet on page112