3Com 3CRWX120695A manual Third-party access points, „ mac-addr- Base MAC address of the 3Com radio

		display rfdetect visible 463
	See Also
	„ display rfdetect data on page 459
	„ display rfdetect visible on page 463
display rfdetect	Displays the BSSIDs discovered by a specific 3Com radio. The data
visible	includes BSSIDs transmitted by other 3Com radios as well as by
	third-party access points.
	Syntax — display rfdetect visible mac-addr
	Syntax — display rfdetect visible ap map-num[radio {1 2}]
	Syntax — display rfdetect visible dap
		dap-num[radio {1 2}]
	„ mac-addr— Base MAC address of the 3Com radio.
		To display the base MAC address of a 3Com radio, use the
		display {ap dap} status command.
	„ map-num— Port connected to the MAP access point for which to
		display neighboring BSSIDs.
	„ dap-num— Number of a Distributed MAP for which to display
		neighboring BSSIDs.
	„	radio 1 — Shows neighbor information for radio 1.
	„	radio 2 — Shows neighbor information for radio 2. (This option does

not apply to single-radio models.) Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — If a 3Com radio is supporting more than one SSID, each of the corresponding BSSIDs is listed separately.

To display rogue information for the display rfdetect mobility-domain

entire Mobility Domain, use the command on the seed switch.