3Com 3CRWX120695A, 3CRWX440095A manual Set service-profile auth-psk command

set service-profile shared-key-auth 311

set service-profileEnables shared-key authentication, in a service profile. shared-key-auth

Use this command only if advised to do so by 3Com. This command does not enable preshared key (PSK) authentication for Wi-Fi Protected Access (WPA). To enable PSK encryption for WPA, use the

set service-profile auth-psk command.

Syntax — set service-profile name shared-key-auth {enable disable}

„name — Service profile name.

„enable — Enables shared-key authentication.

„disable — Disables shared-key authentication.

Defaults — Shared-key authentication is disabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command enables shared-key authentication in service profile sp4:

WX4400# set service-profile sp4 shared-key-auth enable success: change accepted.

See Also

„display radio-profileon page 257

„set radio-profile mode on page 291

set service-profileConfigures the SSID name in a service profile. ssid-name

Syntax — set service-profile name ssid-name ssid-name

„name — Service profile name.

„ssid-name— Name of up to 32 alphanumeric characters, with no spaces.

Defaults — The default SSID name is private.

Access — Enabled.