3Com 3CRWX440095A Output for display auto-tune neighbors, Display auto-tune Neighbors ap 2 radio

252CHAPTER 9: MANAGED ACCESS POINT COMMANDS

Usage — For simplicity, this command displays a single entry for each 3Com radio, even if the radio is supporting multiple BSSIDs. However, BSSIDs for third-party 802.11 radios are listed separately, even if a radio is supporting more than one BSSID.

Information is displayed for a radio if the radio sends beacon frames or responds to probe requests. Even if a radio’s SSIDs are unadvertised, 3Com radios detect the empty beacon frames (beacon frames without SSIDs) sent by the radio, and include the radio in the neighbor list.

Examples — The following command displays neighbor information for radio 1 on the directly connected MAP access point on port 2:

WX1200#	display auto-tune	neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel	Neighbor BSS/MAC	RSSI
-------	-----------------	----
1	00:0b:85:06:e3:60	-46
1	00:0b:0e:00:0a:80	-78
1	00:0b:0e:00:d2:c0	-74
1	00:0b:85:06:dd:00	-50
1	00:0b:0e:00:05:c1	-72

Table 51 describes the fields in this display.

Table 51 Output for display auto-tune neighbors

Field	Description
Channel	Channel on which the BSSID is detected.
Neighbor BSS/MAC	BSSID detected by the radio.
RSSI	Received signal strength indication (RSSI), in decibels referred
	to 1 milliwatt (dBm). A higher value indicates a stronger
	signal.

See Also

„display auto-tune attributes on page 249

„display radio-profileon page 257

„set {ap dap} radio auto-tunemax-poweron page 270

„set {ap dap} radio auto-tune max- retransmissions on page 271

„set radio-profileauto-tunechannel-configon page 281

„set radio-profileauto-tunechannel-holddownon page 282