Altec Lansing CS21 manual Symptom, Possible Problem, Solution, Low hum

Models: CS21

1 20
Download 20 pages 51.99 Kb
Page 6
Image 6

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

Low hum

The AC in your house is at 60 cycles per second, which

Some low hum may be detected when your speaker system is powered on

from subwoofer.

is within the audio frequency of your subwoofer.

without an audio source playing, or when the volume is set at an extremely

 

 

low level.

 

 

 

Loud hum

Bad connection.

Unplug the power cord from the surge protector (if used), and plug directly

from subwoofer.

 

into an AC wall outlet.

 

 

 

 

 

Check to make sure all cables are connected properly and are making

 

 

a clear connection.

 

 

 

 

Volume on your audio source set too high.

Lower the volume or bass level on your PC, portable audio device, etc.

 

 

 

Not enough bass

Check the volume on audio source.

Increase the volume on the audio source.

from subwoofer.

 

 

Bad connection.

Check to make sure all cables are connected properly and are making

 

 

 

a clear connection.

 

 

 

 

Bass setting is too low.

Increase bass level on back of subwoofer.

 

 

 

Distorted

Subwoofer too close to PC monitor or TV set.

Because the subwoofer is not magnetically shielded, it can cause distortion if

picture on

 

it’s too close to your PC monitor or TV set. Move the subwoofer so it’s at least

PC monitor or

 

2 feet from the monitor or TV set.

TV screen.

 

 

 

 

 

4

Page 6
Image 6
Altec Lansing CS21 manual Symptom, Possible Problem, Solution, Low hum