3Com 3CRWX440095A, 3CRWX120695A manual Cipher-wep104, Use the set service-profile wep commands

306CHAPTER 9: MANAGED ACCESS POINT COMMANDS

set service-profile	Enables dynamic Wired Equivalent Privacy (WEP) with 104-bit keys, in a
cipher-wep104	service profile.
	Syntax — set service-profile name cipher-wep104 {enable
	disable}
	„ name — Service profile name.
	„ enable — Enables 104-bit WEP encryption for WPA clients.
	„ disable — Disables 104-bit WEP encryption for WPA clients.
	Defaults — 104-bit WEP encryption is disabled by default.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — To use 104-bit WEP with WPA clients, you must also enable the
	WPA IE.
	When 104-bit WEP in WPA is enabled in the service profile, radios
	managed by a radio profile that is mapped to the service profile can also
	support non-WPA clients that use dynamic WEP.
	To support WPA clients that use 40-bit dynamic WEP, you must enable
	WEP with 40-bit keys. Use the set service-profile cipher-wep40
	command.
	Microsoft Windows XP does not support WEP with WPA. To configure a
	service profile to provide dynamic WEP for XP clients, leave WPA disabled
	and use the set service-profile wep commands.
	To support non-WPA clients that use static WEP, you must configure
	static WEP keys. Use the set service-profile wep key-index command.
	Examples — The following command configures service profile sp2 to
	use 104-bit WEP encryption:
	WX4400# set service-profile sp2 cipher-wep104 enable
	success: change accepted.

See Also

„set service-profilecipher-ccmpon page 304