3Com 3CRWX120695A, 3CRWX440095A manual Set port negotiation, Set port poe, Result

	set port negotiation 79
set port negotiation	Disables or reenables autonegotiation on gigabit Ethernet or 10/100
	Ethernet ports.
	Syntax — set port negotiation port-list{enable disable}
	„ port-list— List of physical ports. MSS disables or reenables
	autonegotiation on all the specified ports.
	„ enable — Enables autonegotiation on the specified ports.
	„ disable — Disables autonegotiation on the specified ports.
	Defaults — Autonegotiation is enabled on all Ethernet ports by default.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Usage — WX1200 10/100 Ethernet ports support half-duplex and
	full-duplex operation.
	Examples — The following command disables autonegotiation on ports
	3 and 5:
	WX1200# set port negotiation 3,5 disable
	The following command enables autonegotiation on port 2:
	WX1200# set port negotiation 2 enable
set port poe	Enables or disables Power over Ethernet (PoE) on ports connected to MAP
	access points.
	CAUTION: When you set the port type for MAP use, you can enable PoE
	on the port. Use the WX switch’s PoE to power 3Com MAP access points
	only. If you enable PoE on ports connected to other devices, damage can
	result.

Syntax — set port poe port-listenable disable

„port-list— List of physical ports. MSS disables or reenables PoE on all the specified ports.

„enable — Enables PoE on the specified ports.

„disable — Disables PoE on the specified ports.