3Com 3CRWX120695A, 3CRWX440095A manual Ignore, Syntax clear rfdetect ignore mac-addr

clear rfdetect ignore 457

If the clear rfdetect countermeasures mac command removes the last rogue from the list created by set rfdetect countermeasures mac commands, RF detection returns to the default handling of countermeasures. Consequently, the rogue you cleared can still be attacked if it is still in the rogue list. To stop countermeasures against a device, add the device to the known addresses list using the set rfdetect ignore command.

Examples — The following command removes rogue BSSID aa:bb:cc:11:22:33 from the list configured by the set rfdetect countermeasures mac command:

WX1200# clear rfdetect countermeasures mac aa:bb:cc:11:22:33 success: clear rfdetect countermeasures mac aa:bb:cc:11:22:33

See Also

„display rfdetect ignore on page 461

„set rf detect countermeasures on page 465

„set rfdetect countermeasures mac on page 466

„set rfdetect ignore on page 467

clear rfdetect	Removes a device from the ignore list for RF scans. MSS does not
ignore	generate log messages or traps for the devices in the ignore list.

Syntax — clear rfdetect ignore mac-addr

„mac-addr— Basic service set identifier (BSSID), which is a MAC address, of the device to remove from the ignore list.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command removes BSSID aa:bb:cc:11:22:33 from the ignore list for RF scans:

WX1200# clear rfdetect ignore aa:bb:cc:11:22:33 success: aa:bb:cc:11:22:33 is no longer ignored.