3Com 3CRWX440095A, 3CRWX120695A Set ap dap name Changes an MAP name, „ display ap dap group on

268CHAPTER 9: MANAGED ACCESS POINT COMMANDS

The following command removes the MAP access point on port 4 from all

MAP access point groups:

WX1200# set ap 4 group none success: change accepted.

See Also

„“display {ap dap} config” on page 237

„display {ap dap} group on page 245

set {ap dap} name Changes an MAP name.

Syntax — set {ap port-list dap dap-num}name name

„ap port-list— List of ports connected to the MAP access point to rename.

„dap dap-num— Number of a Distributed MAP to rename.

„name — Alphanumeric string of up to 16 characters, with no spaces.

Defaults — The default name of a directly attached MAP is based on the port number of the MAP access port attached to the MAP. For example, the default name for a MAP on MAP access port 1 is MAP01. The default name of a Distributed MAP is based on the number you assign to it when you configure the connection. For example, the default name for Distributed MAP 1 is DMP01.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command changes the name of the MAP access point on port 1 to techpubs:

WX1200# set ap 1 name techpubs success: change accepted.

See Also

„“display {ap dap} config” on page 237