3Com 3CRWX440095A, 3CRWX120695A manual See Also „ display port status on „ display dot1x on

434CHAPTER 15: 802.1X MANAGEMENT COMMANDS

„forceunauth — Forces the specified wired authentication port(s) to unconditionally reject all 802.1X authentication attempts with an EAP failure message.

„auto — Allows the specified wired authentication ports to process 802.1X authentication normally as determined for the user by the set authentication dot1X command.

„port-list— One or more wired authentication ports for which to set 802.1X port control.

Defaults — By default, wired authentication ports are set to auto.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — This command affects only wired authentication ports.

Examples — The following command forces port 1 to unconditionally accept all 802.1X authentication attempts:

WX4400# set dot1x port-control forceauth 1 success: authcontrol for 1 is set to FORCE-AUTH.

See Also

„display port status on page 66

„display dot1x on page 427

set dot1x	Sets the number of seconds an WX remains quiet and does not respond
quiet-period	to a supplicant after a failed authentication.

Syntax — set dot1x quiet-period seconds

„seconds — Specify a value between 0 and 65,535.

Defaults — The default is 60 seconds.

Access — Enabled.

History —Introduced in MSS Version 3.0.