3Com 3CRWX120695A Describes the fields that can appear in display aaa output, Display aaa Output

display aaa 181

set authentication dot1x ssid mycorp * peap-mschapv2 sg1 sg2 sg3 set authentication dot1x ssid any ** peap-mschapv2 sg1 sg2 sg3 set accounting dot1x Nin ssid mycorp stop-only sg2

set accounting admin Natasha start-stop local

set authentication last-resort ssid guestssid local

user Nin

Password = 082c6c64060b (encrypted) Filter-Id = acl-999.in

Filter-Id = acl-999.out user last-resort-guestssid Vlan-Name = k2

user last-resort-any Vlan-Name = foo mac-user 01:02:03:04:05:06 usergroup eastcoasters

session-timeout = 99

Table 38 describes the fields that can appear in display aaa output.

Table 38 display aaa Output

Field	Description
Default Values	RADIUS default values for all parameters.
authport	UDP port on the WX switch for transmission of RADIUS
	authorization and authentication messages. The default
	port is 1812.
acctport	UDP port on the WX switch for transmission of RADIUS
	accounting records. The default is port 1813.
timeout	Number of seconds the WX switch waits for a RADIUS
	server to respond before retransmitting. The default is
	5 seconds.
acct-timeout	Number of seconds the WX switch waits for a RADIUS
	server to respond to an accounting request before
	retransmitting. The default is 5 seconds.
retrans	Number of times the WX switch retransmits a message
	before determining a RADIUS server unresponsive. The
	default is 3 times.
deadtime	Number of minutes the WX switch waits after determining
	a RADIUS server is unresponsive before trying to reconnect
	with this server. During the dead time, the RADIUS server
	is ignored by the WX switch. The default is 0 minutes.
key	Shared secret key, or password, used to authenticate to a
	RADIUS server. The default is no key.