3Com 3CRWX120695A manual Set web-aaa, To add a user to a group, user the command set user group

set web-aaa 221

„attribute-name value — Name and value of an attribute you are using to authorize all users in the group for a particular service or session characteristic. For a list of authorization attributes and values that you can assign to users, see Table 40 on page 209.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — To change the value of an attribute, enter set usergroup attr with the new value. To delete an attribute, use clear usergroup attr.

To add a user to a group, user the command set user group.

Examples — The following command adds the user group cardiology to the local database and assigns all the group members to VLAN crimson:

WX4400# set usergroup cardiology vlan-name crimson success: change accepted.

See Also

„clear usergroup on page 178

„clear usergroup attr on page 179

„display aaa on page 180

set web-aaa Globally enables or disables WebAAA on an WX switch.

Syntax — set web-aaa {enable disable}

„enable — Enables WebAAA on the switch.

„disable — Disables WebAAA on the switch.

Defaults — Enabled.

Access — Enabled.

History —Introduced in MSS Version 3.0.