set system contact 51

set system contact Stores a contact name for the WX switch.

Syntax set system contact string

„string — Alphanumeric string up to 256 characters long, with no blank spaces.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

To view the system contact string, type the display system command.

Examples — The following command sets the system contact information to tamara@example.com:

WX1200# set system contact tamara@example.com success: change accepted.

See Also

„clear system on page 39

„display system on page 42

„set system location on page 54

„set system name on page 55

set system

Defines the country-specific IEEE 802.11 regulations to enforce on the

countrycode

WX switch.

Syntax set system countrycode code

„code Two-letter code for the country of operation for the WX switch. You can specify one of the codes listed in Table 8.

Table 8 Country Codes

CountryCode

AustraliaAU

AustriaAT

Page 51
Image 51
3Com 3CRWX120695A, 3CRWX440095A manual Countrycode, Set system contact Stores a contact name for the WX switch