3Com 3CRWX440095A, 3CRWX120695A manual Network, VLANs, or session ID, Users

442CHAPTER 16: SESSION MANAGEMENT COMMANDS

	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — To clear all administrator sessions type the following
	command:
	WX4400# clear sessions admin
	This will terminate manager sessions,
	do you wish to continue? (yn) [n]y
	To clear all administrative sessions through the console, type the
	following command:
	WX4400# clear sessions console
	This will terminate manager sessions,
	do you wish to continue? (yn) [n]y
	To clear all administrative Telnet sessions, type the following command:
	WX4400# clear sessions telnet
	This will terminate manager sessions,
	do you wish to continue? (yn) [n]y
	To clear Telnet client session 0, type the following command:
	WX4400# clear sessions telnet client 0
	See Also
	„ display sessions on page 444
clear sessions	Clears all network sessions for a specified username or set of usernames,
network	MAC address or set of MAC addresses, virtual LAN (VLAN) or set of
	VLANs, or session ID.
	Syntax — clear sessions network {user user-globmac-addr
	mac-addr-glob vlan vlan-glob session-idlocal-session-id}
	„ user user-glob— Clears all network sessions for a single user or set
	of users.
	Specify a username, use the double-asterisk wildcard character (**) to
	specify all usernames, or use the single-asterisk wildcard character (*)
	to specify a set of usernames up to or following the first delimiter