3Com 3CRWX440095A, 3CRWX120695A manual Quiet-period, „ set dot1x port-controlon

424CHAPTER 15: 802.1X MANAGEMENT COMMANDS

	Usage — This command is overridden by the set dot1x authcontrol
	command. The clear dot1x port-controlcommand returns port control
	to the method configured. This command applies only to wired
	authentication ports.
	Examples — Type the following command to reset the wired
	authentication port control:
	WX4400# clear dot1x port-control
	success: change accepted.
	See Also
	„ display dot1x on page 427
	„ set dot1x port-controlon page 433
clear dot1x	Resets the quiet period after a failed authentication to the default setting.
quiet-period	Syntax — clear dot1x quiet-period
	Defaults — The default is 60 seconds.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — Type the following command to reset the 802.1X quiet
	period to the default:
	WX4400# clear dot1x quiet-period
	success: change accepted.

See Also

„display dot1x on page 427

„set dot1x quiet-periodon page 434