3Com 3CRWX440095A, 3CRWX120695A manual Set snmp, Community, Public and private

150CHAPTER 6: IP SERVICES COMMANDS

	See Also
	„ clear ntp server on page 113
	„ clear ntp update-intervalon page 113
	„ display ntp on page 126
	„ set ntp on page 148
	„ set ntp server on page 148
set snmp	Names the SNMP read and read-write communities, which allow remote
community	wireless LAN switches to access management information base (MIB)
	objects on a WX switch.
	Syntax — set snmp community {read-only read-write}
	comm-string
	„ read-only— Allows the specified community string read access only.
	„ read-write— Allows the specified community string read and write
	access.
	„ comm-string— Name of the SNMP community. Specify between 1
	and 256 alphanumeric characters, with no spaces.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — SNMP community strings are passed as clear text. 3Com
	recommends that you use strings that cannot easily be guessed by
	unauthorized users. For example, do not use the well-known strings
	public and private.
	Examples — The following command configures the read-write
	community good_community:
	WX4400# set snmp community read-write good_community
	success: change accepted.

See Also

„clear snmp trap receiver on page 114

„display snmp configuration on page 128