3Com 3CRWX120695A, 3CRWX440095A manual Set timezone, WX4400# set timedate date feb 29 2004 time

set timezone 157

Configure summertime before you set the time and date. Otherwise, summertime’s adjustment of the time will make the time incorrect, if the date is within the summertime period.

Examples — The following command sets the date to March 13, 2003 and time to 11:11:12:

	WX4400# set timedate date feb 29 2004 time 23:58:00
	Time now is:	Sun Feb 29 2004, 23:58:02 PST
	See Also
	„ clear summertime on page 115
	„ clear timezone on page 116
	„ display summertime on page 130
	„ display timedate on page 130
	„ display timezone on page 131
	„ set summertime on page 154
	„ set timezone on page 157
set timezone	Sets the number of hours, and optionally the number of minutes, that the
	wireless LAN switch’s real-time clock is offset from Coordinated Universal

Time (UTC). These values are also used by Network Time Protocol (NTP), if it is enabled.

Syntax — set timezone zone-name {-hours [minutes]}

„zone-name— Time zone name of up to 32 alphabetic characters. You can use a standard name or any name you like.

„- (minus sign) — Minus time to indicate hours (and minutes) to be subtracted from UTC. Otherwise, hours and minutes are added by default.

„hours — Number of hours to add or subtract from UTC.

„minutes — Number of minutes to add or subtract from UTC.

Defaults — If this command is not used, then the default time zone is

UTC.

Access — Enabled.