76CHAPTER 4: PORT COMMANDS

The following command removes Distributed MAP 1:

WX4400# clear dap 1

This will clear specified DAP devices.

Would you like to continue? (y/n) [n]y

See Also

„clear dap on page 58

„clear port type on page 61

„set port type ap on page 83

„set radio-profile11g-onlyon page 280

„set system countrycode on page 51

set port

Administratively disables or reenables a port.

Syntax set port {enable disable} port-list

„enable — Enables the specified ports.

„disable — Disables the specified ports.

„port-list— List of physical ports. MSS disables or reenables all the specified ports.

Defaults — All ports are enabled.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — A port that is administratively disabled cannot send or receive packets. This command does not affect the link state of the port.

Examples — The following command disables port 6:

WX1200# set port disable 6 success: set "disable" on port 6

The fol1owing command reenables the port:

WX1200# set port enable 6 success: set "enable" on port 6

Page 76
Image 76
3Com 3CRWX440095A manual Set port, Examples The following command disables port, Fol1owing command reenables the port